Loose electrical outlets are extremely frustrating. In addition to that, it could seriously impact your home’s safety. Lucky for you, we have some tips on how to repair loose outlets. You should always keep your home safe and don’t ignore loose outlets.

Is a Loose Outlet Unsafe?

Of course, to trigger a catastrophe in your home, all it takes is a single electrical spark. Thus, it is extremely crucial to ensure that you tighten the outlet right away.

Things to Consider When Examining Your Outlets

Repairing a loose outlet is pretty direct and easy most of the time. However, you can have a few bigger issues and might want to contact a Las Vegas Low Voltage electrician if you find any of the problems below behind your outlet.

  • Broken Switch Plates or Outlet Covers

You need to replace every broken cover right away. You can buy replacement outlet covers at your nearest local hardware shop. You have to ensure that the wires and covers inside are secure to ensure safety.

  • Excessive Scorch Marks or Heat

Any noticeable scorch marks or any form of heat on your outlet are a clear sign of unsafe wiring. To get to the root of the problem and keep your house safe, it is best to contact a professional electrician.

  • Frayed Wires

There are a lot of reasons why you’ve got frayed wires. A lot of times, the fraying comes from heat or age. You should contact a professional electrician right away if you find frayed wires behind your loose outlet.

How to Repair Your Own Loose Outlet

  • Turn the Power Off

You’ve got to ensure that the power to the outlet is fully turn off on the primary circuit panel. Testing the outlet using a voltage tester is the only way to be totally sure that the power to the loose outlet is cut off.

  • Unscrew the Faceplate and See What Happens

You’ll be able to see if the plug was the unsecured part of if it was the faceplate. Just tightly screw the faceplate to stop it from wiggling if you try to move the plug and it stays secure.

  • Examine if the Plugs are Supported

You should examine the screws holding the plug if your problem isn’t the faceplate. You have to ensure they’re screwed in all the way if they aren’t. you will have to secure the plug by utilizing outlet shims if you see that the screws are tightened all the way but not reinforcing the plug. You can usually find an outlet shim at your nearest local hardware shop.

You should not have any loose outlet after checking both the plug support and faceplate. It is suggested that you regularly examine the outlets in your house. This is to ensure they’re secured and to verify that your house is safe. You’re able to ensure your house is safe by just tightening your outlet screws. You can always call a professional electrician if you don’t feel comfortable fixing or checking the outlets on your own.